Engine Box, Floors, and working on a 1903 Lozier Launch!

Well we are having variable temperatures so on day is just above freezing and others are really below freezing. I have been able to work on various things on the boat and have spent time with Jody Lapham and his Lozier Launch. Jody has been great with helping on my project. Recently I was at his shop and he helped me dress and cut my boards for my engine box, Thanks Jody! Here are some pictures of our efforts.





Jody had a piece of Mahogany that I can use for the engine box uprights as well as new engine blocks. I shifted gears to the floors after this because Maine Coast Lumber has a sale on Meranti which is what they use to sell as Philipine Mahagoney. It is a really good sale to the point that the plywood was cheaper than fir so I did the floors out of it as well.

The floors came with some Nautolex on them but I think this boat cam with painted floors. I am taking Myndy Wooddruff's suggection to cover the floor with the new Nautolex flooring, we chose natural. Right now I have cut out the floors with a jig saw, they came out pretty good but not perfect. I think they will look fine when they are covered.










I then took the floors and started applying Poly to the floors to get them ready to cover. I caught a great deal on Nautolex 72" bolts at $17.95 a yard. I have 2 coats on one side and am ready to flip them over to do the other side.





The next step after painting is covering and refitting the floor. I am hoping to have this done this weekend as long as I can finish the painting. I have been thinking of investing the money in a new gas tank but they are pricey as compared to the $100.00 you would spend on a tank kit. We will see, maybe if I can sell some Harley parts this would be easier to decide.

Making Headway

Things are starting to pick up! I have been putting more chrome on and working on the various wiring needs. I put the step boxes in and like the way they turned out. I reused everything including one top that was cracked all the way through. Here is a before and after photo.


Here are some more detail photo's, one you can see the repair to the lid. All in all it went pretty good and installation was pretty straight forward.




I am putting the chrome back on and will re-chrome pieces in the future as I can afford the plating cost. I cleaned the individual pieces as best as I could but some are missing plating and most pieces are not bright like new chrome.



I also have been working on the bilge pump wiring and hiding a switch under the gauge cluster. I got a rule swith and disassebled it so I could mount the switch through the bulkhead. The power light and inline fuse are on the other side of the bulk head. I installed in an existing hole a LED light wiht the switch so I can see if power is coming in.

I have also came across a sale on Meranti, which is basically what use to be sold as Phillipine Mahagoney. It is pretty regulated in how it is harvested and matches the existing wood perfectly. Maine Coast Lumber has it on sale for $52.50 a sheet for 3/8. It was cheaper than marine for plywood, so my floors will be made of Meranti and I am covering them with Nautolex Natural. I found the best price for the Nautolex at Defender $17.95 a yard. That price is for 72" material not 54". Most places are selling for $29.95 a yard.

More to come with the floors and motor box.

Plowing alot and It is starting to look like a boat!

Here on Button Bay ice fishing season is well under way. I have been out the ice is about a foot thick and have not caught a thing. My father in law caught a can! Really.

I have put in the wiring, oil line, and tach cable in my previous post and this time around I have started to put the boat back together and it looks pretty nice. I put the dash back in and the cover for the steering shaft.


After I got the dash in I thought I would tackle the front bench back, which proved to be a challenge. I put the back in place and I wanted to cross drill the screws from the back of the stringer that the seat back rested against. From the factory they screwed from the front of the seat back to the board I mentioned then put another stringer board in front of the seat back. Thi meant if you ever wanted to remove the front bench seat you would have to take up the floor remove the front stringer and then remove the seat back. If I drilled the screws from the back I would only have to remove the floor behind the seat back and remove the screws to remove the seat back. Even though the section of floor behind the seat is big it is easier to work out in the open than under the bench seat.



I ran into trouble while putting in the supports on one side and had not 1 but 3 screw bulges. I really tried to line the support up with th eexisting holes but my bit had to be off. I essentially redrilled the hole at a slightly different angle, but now I have ot fix the bulges! Rats


I had to put a ratchet strap around the boat to bring the sides in to have them meet up better for the side supports. My boat was not perfect and the side supports always showed but I thought I would try to pull it in and it came in a little. I had an alteration to my boat by a previous owner in that they drilled a hole through the hull and put a long screw through the hull and the side bench support then used a bracket to attach this all to the seat back, interesting and pretty solid!


All in all pretty productive and I have moved onto figuring out stainless screws for my brightwork. I think things will start to pick up and I am getting excited to see the boat take shape. More to come from the frozen north.